Verifying Installation or Upgrade

After installing or upgrading Traverse, make sure that the application is operating properly.

Note: After an upgrade, remember to clear your browser cache.

Verifying the Traverse Installation

1. After starting Traverse R93 on the Web Application host system, wait 30 to 60 seconds while the application initializes.
2. In your browser, enter http://n.n.n.n/ (where n.n.n.n is the IP address of the Web Application server).

Note: If you changed the default port on which Traverse operates, make sure you enter the URL as 
follows: http://n.n.n.n:port# (where n.n.n.n is the IP address of the Web Application server and port# is the port you configured to, for example, avoid conflicts with existing web servers.

1. Log in to Traverse using an existing login ID and password.
2. Navigate to Status > Devices and make sure the severity filter is off.
3. Navigate to any device. Make sure that the date and time displayed under Test Time matches (or is within 5 to 15 minutes of) the current time.

   Note: The DGE might require up to 30 minutes before it starts collecting metrics.

4. Navigate to any test and make sure that historical performance data displays correctly on the graphs.