|
|
|
|
Features
TV-332 |
A new 'Open Ticket in VSA Service Desk' action item has been added to Traverse. Selecting this option creates a new Service Desk ticket in a specified VSA. |
|
TV-495 |
Integration between Traverse and the VSA Service Desk module can now be enabled and disabled using the Superuser > Global Config > Web Application page. Enabling requires specifying the VSA and credentials that provide access to the Service Desk module. |
|
TV-296 |
Comments set for a container are now visible in the summary view. |
|
TV-345 |
New Feature: Added event processing rules for HP StorageWorks |
|
TV-348 |
Added support for discovering and monitoring Symantec Bightmail appliances. |
|
TV-357 |
Added support for discovering and monitoring Cisco Unity Express. |
|
TV-362 |
Added support for discovering and monitoring APC PDU w/Powernet 4.1.x. |
|
TV-375 |
Additional details are now displayed regarding current disk/memory usage in alert notifications. |
|
TV-412 |
Added event processing rules for APC SURT3000XL UPS devices. |
|
TV-423 |
Added configuration management support for Cisco SF-300 series switch. |
|
TV-426 |
Added support for discovering and monitoring Cisco Meraki WiFi devices. |
|
TV-484 |
The Overlay Map feature no longer uses the deprecated Flash API for Google Maps. |
|
Bug Fixes
TV-25 |
Fixed an issue where a Netflow v9 source would only bind to an IPv6 interface/address. |
|
TV-104 |
Fixed an issue that caused a 'duplicate entry' error when trying to write the first entry of an SLA Manager period. |
|
TV-107 |
Fixed an issue where application profiles for a department were not shown when an administrative user created a new device. |
|
TV-185 |
The test discovery process no longer creates a temperature metric for Cisco 1921 devices. |
|
TV-194 |
The Traverse documentation was updated to clarify how timestamps are used by NCM backups. |
|
TV-220 |
Fixed an issue where SLA measurement details at hour granularity were incorrect. |
|
TV-234 |
Fixed an issue that caused the container status to be incorrectly reported in notifications when alarms are used for overall severity. |
|
TV-242 |
Fixed an issue where scheduled maintenance with special characters could not be assigned. |
|
TV-246 |
Fixed an issue where scheduled reports would be triggered after the intended date. |
|
TV-250 |
Fixed an issue where DGE extensions with the same IP address were collapsed into a single entry on the component health page. |
|
TV-262 |
Fixed an issue where devices were leaving maintenance state ahead of configured schedule. |
|
TV-274 |
Fixed an issue where a department containing a device with shared credentials could not be deleted. |
|
TV-276 |
Database exception observed when large number of API queries are executed. |
|
TV-278 |
Fixed an issue where correlation histograms were not honoring the severity filter. |
|
TV-280 |
Fixed an issue with SNMP test discovery where a target device would not respond to a query for SysUptime.0. |
|
TV-298 |
Fixed an issue that caused tests to be placed incorrectly under the wrong display category. |
|
TV-304 |
Fixed an issue that caused summary engine deadlocks while processing container event messages. |
|
TV-305 |
Fixed an issue where containers could not be edited from a summary view. |
|
TV-313 |
Updated device signature for Microsoft SQL Server for CPU usage metrics |
|
TV-314 |
Updated the device signature for the Fortinet firewall appliance to include additional metrics. |
|
TV-339 |
Fixed an issue with the display of preview graphs for random tests. |
|
TV-340 |
Fixed an issue where Raw Data tab was not showing the results selected within chart view. |
|
TV-343 |
Fixed an issue where gauges on the Device Summary page were not rendered properly when using Firefox. |
|
TV-346 |
Fixed an issue where output from nightly cleanup tasks were not recorded in the correct log file. |
|
TV-347 |
Fixed the link to create a new container from the Getting Started page. |
|
TV-354 |
Fixed an issue where the initial view test history did not display a full 6 hours of data. |
|
TV-358 |
Fixed an issue where threshold indicators on gauges and graphs on the Device Summary page were not shown correctly. |
|
TV-363 |
Fixed an issue with incorrect representation of the Overall Datacenter Health Status test for VMWare hypervisor |
|
TV-366 |
Fixed a display issue where large polling interval made it appear data was being lost on historical charts. |
|
TV-370 |
Fixed an issue where a command line query tool could not be executed on Windows. |
|
TV-371 |
Fixed an issue where large queries were incorrectly executed when a device did not include ping tests configured. |
|
TV-376 |
The Traverse > Discovery workflow now allows you to re-select all tests after deselecting them. |
|
TV-377 |
Fixed an issue where department name column was not shown on Device Summary view when logged in as admin user. |
|
TV-379 |
Fixed an issue where a blank user name for the WMI property was not accepted during test discovery. |
|
TV-381 |
Fixed an issue where containers were not grouped by department when logged in as admin user. |
|
TV-382 |
The Event Manager console now launches as expected when the user clicks an event icon in the Device Summary view. |
|
TV-384 |
Fixed an issue where Configuration Management database was not shutting down in a consistent manner. |
|
TV-385 |
Fixed an error that prevented drill-down from mini-summary panel |
|
TV-388 |
Fixed an issue where a DGE would lose connection to the WMI Query Daemon when collecting process data. |
|
TV-390 |
Fixed a Traverse user interface issue that prevented the deletion of an existing flow source. |
|
TV-395 |
Fixed an issue on the Device Summary page when one or more exported devices were present. |
|
TV-397 |
Fixed an issue where Dashboard view could not be loaded using Internet Explorer versions 10 or 11. |
|
TV-399 |
Fixed an issue where Netflow v9 records from Cisco ASA devices were not being collected. |
|
TV-402 |
Fixed an issue where incorrectly formatted source IP address prevented new flow collector configuration to be created. |
|
TV-404 |
Fixed an issue where the chart within Test Details view would not show labels on Y-axis when polled result is zero. |
|
TV-405 |
Fixed an issue where VMware monitor was not able to communicate with certain hosts after upgrade to 7.0 |
|
TV-408 |
Fixed an issue where backup of Dell PowerConnect switch was failing due to alternate prompts. |
|
TV-409 |
Fixed an error that occurred when loading a summary of VMware servers with more than 100 virtual machines. |
|
TV-413 |
Fixed an issue where 64-bit SNMP counters were used to measure interface traffic volume when the target Cisco device does not support them. |
|
TV-415 |
Test history chart now shows tooltip with min/max/avg result when hovering over a data point. |
|
TV-417 |
Fixed an issue that potentially affected the proper determination of container summary. |
|
TV-418 |
Fixed an issue that prevented searching for devices assigned within a linked template. |
|
TV-422 |
Fixed an issue where clicking an event column for a device without an active message event would throw an error. |
|
TV-429 |
Fixed an issue that prevented editing a previously saved Ad-Hoc report. |
|
TV-431 |
Fixed an issue where CUCM monitor was not able to communicate with certain hosts after upgrade to 7.0 |
|
TV-432 |
Fixed an issue where an error message was shown when loading the details for a router device. |
|
TV-433 |
Fixed an issue where axis labels were not shown on charts with long term historical results. |
|
TV-434 |
The correct filter is now applied when selecting a department using the Status > Departments view. |
|
TV-438 |
Fixed an issue where test specific help could not be loaded from Device Details view. |
|
TV-447 |
Fixed an issue with incorrect uptime value on Device Health panel within Device Details view. |
|
TV-448 |
Fixed an issue where editing exported devices would display an error message. |
|
TV-459 |
Fixed an issue where active non-OK events that started before the selected hour were not shown on pop-up history of device health histogram. |
|
TV-467 |
Fixed an issue where recent events tab for a device was inaccessible. |
|
TV-470 |
Fixed an issue where maximum of 50 entries in a test container were visible on Summary View. |
|
TV-478 |
Fixed an issue where exported devices w/o any tests selected were not visible on Device Summary view. |
|
TV-482 |
Fixed an issue where option to download raw test results was not functioning properly. |
|
TV-483 |
Fixed an issue where tests could not be deleted using BVE API server. |
|
TV-485 |
Fixed an issue that caused the Web Application initialization to fail when launched concurrently with other components. |
|
TV-493 |
Fixed an issue where custom tag names were not shown on Device Details view. |
|
TV-494 |
Fixed an issue with uploading new IOS images to routers. |
|
TV-497 |
An error message no longer displays when clearing an SLA alarm on the Event Manager page. |
|
TV-506 |
Fixed an issue that caused the command line device migration utility to not complete a requested operation. |
|
TV-511 |
Log messages generated by a MySQL monitor no longer display the password in cleartext. |
|
TV-520 |
Fixed a potential security vulnerability. |
|
TV-540 |
Fixed an issue with BVE API server while retrieving list of Call Manager tests. |
|
TV-559 |
Fixed an issue that prevented drill-down by an admin of a container on a map from displaying the Container Summary view. |
|
TV-576 |
Fixed an issue where new summary views were not accessible after upgrading from version 5.6. |
|
TV-579 |
WSDL specifies incorrect result type for getEventAckDetailsResponse. |
|
TV-590 |
Fixed an issue where installation would proceed even when "unzip" command was missing. |
|
TV-605 |
Fixed an issue where custom device category report was not showing any information. |
|
TV-606 |
Fixed an issue where form parameters were missing for storage reports. |
|
TV-611 |
Unable to create/update scheduled report with SSLv3 disabled. |
|