Post-installation and Upgrade Verification

After installing or upgrading Traverse, make sure that the application is operating properly.

Note: After an upgrade, remember to clear your browser cache.

Verifying the Traverse Installation

1. After starting Traverse R8 on the BVE/Web Application host system, wait 30 to 60 seconds while the application initializes.
2. In your browser, enter http://n.n.n.n/ (where n.n.n.n is the IP address of the BVE/Web Application server).

Note: If you changed the default port on which Traverse operates, make sure you enter the URL as 
follows: http://n.n.n.n:port# (where n.n.n.n is the IP address of the BVE/Web Application server and port# is the port you configured to, for example, avoid conflicts with existing web servers.

1. Log in to Traverse using an existing login ID and password.
2. Navigate to Status > Devices and make sure the severity filter is off.
3. Navigate to any device. Make sure that the date and time displayed under Test Time matches (or is within 5 to 15 minutes of) the current time.

   Note: The DGE might require up to 30 minutes before it starts collecting metrics.

4. Navigate to any test and make sure that historical performance data displays correctly on the graphs.