- Fixed an issue where a Netflow v9 source would only bind to an IPv6 interface/address.
|
- Fixed an issue that caused a 'duplicate entry' error when trying to write the first entry of an SLA Manager period.
|
- Fixed an issue where application profiles for a department were not shown when an administrative user created a new device.
|
- The test discovery process no longer creates a temperature metric for Cisco 1921 devices.
|
- The Traverse documentation was updated to clarify how timestamps are used by NCM backups.
|
- Fixed an issue where SLA measurement details at hour granularity were incorrect.
|
- Fixed an issue that caused the container status to be incorrectly reported in notifications when alarms are used for overall severity.
|
- Fixed an issue where scheduled maintenance with special characters could not be assigned.
|
- Fixed an issue where scheduled reports would be triggered after the intended date.
|
- Fixed an issue where DGE extensions with the same IP address were collapsed into a single entry on the component health page.
|
- Fixed an issue where devices were leaving maintenance state ahead of configured schedule.
|
- Fixed an issue where a department containing a device with shared credentials could not be deleted.
|
- Database exception observed when large number of API queries are executed.
|
- Fixed an issue where correlation histograms were not honoring the severity filter.
|
- Fixed an issue with SNMP test discovery where a target device would not respond to a query for SysUptime.0.
|
- Fixed an issue that caused tests to be placed incorrectly under the wrong display category.
|
- Fixed an issue that caused summary engine deadlocks while processing container event messages.
|
- Fixed an issue where containers could not be edited from a summary view.
|
- Updated device signature for Microsoft SQL Server for CPU usage metrics
|
- Updated the device signature for the Fortinet firewall appliance to include additional metrics.
|
- Fixed an issue with the display of preview graphs for random tests.
|
- Fixed an issue where Raw Data tab was not showing the results selected within chart view.
|
- Fixed an issue where gauges on the Device Summary page were not rendered properly when using Firefox.
|
- Fixed an issue where output from nightly cleanup tasks were not recorded in the correct log file.
|
- Fixed the link to create a new container from the Getting Started page.
|
- Fixed an issue where the initial view test history did not display a full 6 hours of data.
|
- Fixed an issue where threshold indicators on gauges and graphs on the Device Summary page were not shown correctly.
|
- Fixed an issue with incorrect representation of the Overall Datacenter Health Status test for VMWare hypervisor
|
- Fixed a display issue where large polling interval made it appear data was being lost on historical charts.
|
- Fixed an issue where a command line query tool could not be executed on Windows.
|
- Fixed an issue where large queries were incorrectly executed when a device did not include ping tests configured.
|
- The Traverse > Discovery workflow now allows you to re-select all tests after deselecting them.
|
- Fixed an issue where department name column was not shown on Device Summary view when logged in as admin user.
|
- Fixed an issue where a blank user name for the WMI property was not accepted during test discovery.
|
- Fixed an issue where containers were not grouped by department when logged in as admin user.
|
- The Event Manager console now launches as expected when the user clicks an event icon in the Device Summary view.
|
- Fixed an issue where Configuration Management database was not shutting down in a consistent manner.
|
- Fixed an error that prevented drill-down from mini-summary panel
|
- Fixed an issue where a DGE would lose connection to the WMI Query Daemon when collecting process data.
|
- Fixed a Traverse user interface issue that prevented the deletion of an existing flow source.
|
- Fixed an issue on the Device Summary page when one or more exported devices were present.
|
- Fixed an issue where Dashboard view could not be loaded using Internet Explorer versions 10 or 11.
|
- Fixed an issue where Netflow v9 records from Cisco ASA devices were not being collected.
|
- Fixed an issue where incorrectly formatted source IP address prevented new flow collector configuration to be created.
|
- Fixed an issue where the chart within Test Details view would not show labels on Y-axis when polled result is zero.
|
- Fixed an issue where VMware monitor was not able to communicate with certain hosts after upgrade to 7.0
|
- Fixed an issue where backup of Dell PowerConnect switch was failing due to alternate prompts.
|
- Fixed an error that occurred when loading a summary of VMware servers with more than 100 virtual machines.
|
- Fixed an issue where 64-bit SNMP counters were used to measure interface traffic volume when the target Cisco device does not support them.
|
- Test history chart now shows tooltip with min/max/avg result when hovering over a data point.
|
- Fixed an issue that potentially affected the proper determination of container summary.
|
- Fixed an issue that prevented searching for devices assigned within a linked template.
|
- Fixed an issue where clicking an event column for a device without an active message event would throw an error.
|
- Fixed an issue that prevented editing a previously saved Ad-Hoc report.
|
- Fixed an issue where CUCM monitor was not able to communicate with certain hosts after upgrade to 7.0
|
- Fixed an issue where an error message was shown when loading the details for a router device.
|
- Fixed an issue where axis labels were not shown on charts with long term historical results.
|
- The correct filter is now applied when selecting a department using the Status > Departments view.
|
- Fixed an issue where test specific help could not be loaded from Device Details view.
|
- Fixed an issue with incorrect uptime value on Device Health panel within Device Details view.
|
- Fixed an issue where editing exported devices would display an error message.
|
- Fixed an issue where active non-OK events that started before the selected hour were not shown on pop-up history of device health histogram.
|
- Fixed an issue where recent events tab for a device was inaccessible.
|
- Fixed an issue where maximum of 50 entries in a test container were visible on Summary View.
|
- Fixed an issue where exported devices w/o any tests selected were not visible on Device Summary view.
|
- Fixed an issue where option to download raw test results was not functioning properly.
|
- Fixed an issue where tests could not be deleted using BVE API server.
|
- Fixed an issue that caused the Web Application initialization to fail when launched concurrently with other components.
|
- Fixed an issue where custom tag names were not shown on Device Details view.
|
- Fixed an issue with uploading new IOS images to routers.
|
- An error message no longer displays when clearing an SLA alarm on the Event Manager page.
|
- Fixed an issue that caused the command line device migration utility to not complete a requested operation.
|
- Log messages generated by a MySQL monitor no longer display the password in cleartext.
|
- Fixed a potential security vulnerability.
|
- Fixed an issue with BVE API server while retrieving list of Call Manager tests.
|
- Fixed an issue that prevented drill-down by an admin of a container on a map from displaying the Container Summary view.
|
- Fixed an issue where new summary views were not accessible after upgrading from version 5.6.
|
- WSDL specifies incorrect result type for getEventAckDetailsResponse.
|
- Fixed an issue where installation would proceed even when "unzip" command was missing.
|
- Fixed an issue where custom device category report was not showing any information.
|
- Fixed an issue where form parameters were missing for storage reports.
|
- Unable to create/update scheduled report with SSLv3 disabled.
|