Adding Additional DGE Extensions

Installing a DGE extension is required to relay monitoring data from a local network to your Traverse website. Use the following procedure for creating additional DGE extensions.

Note: Adding additional DGE extensions to your Traverse Cloud instance requires a different procedure than the one used to install your first DGE extension.

1. Navigate to Superuser > DGE Mgmt.
2. Click Create New DGE Extension.
3. Provide a unique name like dgex-customerA.
4. Give a suitable Description to identify the customer.
5. Select the upstream DGE name from the drop down list. This is the Upstream DGE Name you were originally assigned when your Traverse website was created. Unless support has created additional upstream DGEs for you, there should only be one upstream DGE you can select.
6. Select the Upstream DGE Fully Qualified Host Name/IP Address. This is your-unique-site-name.kaseyatrials.com without the http:// prefix.
7. Click on Create DGE Extension.
8. Run the DGE extension installer.
9. Installations steps are described in detail here.
10. When the installer prompts you to enter a DGE Name, ensure it matches the Unique Name you just specified above for the new DGE extension you are creating.
11. Finish up by confirming the "health" of the new DGE extension, as described in the installation procedure.
12. You are now ready to provision the monitoring of devices for this new network by running Network Discovery or by adding devices and tests manually.