Updating Multiple Tests

You can update multiple tests at the same time using the Manage Devices page.

1. Navigate to Administration > Devices.
2. On the Manage Devices page, find the device whose test(s) you want to update, and then click Tests.
3. Select one or more tests.
4. Update any of the following drop-down lists.
   • Modify Test - Update, Suspend, Delete, Resume, Suppress
   • Action Profile - An action profile with an asterisk indicates a default action profile created by an adminstrator.
   • Test Schedule - Selecting a schedule limits testing by time of day or by weekday.
   • Warning Threshold
   • Critical Threshold
   • Test interval
   • Flap Prevention Wait Cycles - Sets the number of cycles to show the TRANSIENT state when a test changes states. For example, if flap-prevention cycle is configured to be 2, and a ping test is configured for 3 minute interval, when the ping test switches from OK state to WARNING, until the test remains in the new state for 2 additional cycles (6 min), on the Web application the test will be shown in TRANSIENT state.
   • Adaptive Threshold - Use the Test Baseline Management link to configure adaptive thresholds for multiple tests.
5. Click Submit to save your changes.