Offsite Servers

The Offsite Servers page safely and securely transfers backup images from a LAN to a remote location. Offsite replication transfers all changes to files and sub-directories in the Local Server directory to a specified offsite server directory. File transfers are scheduled using Schedule Transfer. Image Location directories should be defined as subdirectories of a Local Server directory to be included in these transfers.

Note: See Synthetic Full Backups.

Offsite Server Configuration

Any machine ID may act as an offsite server. You may also have as many offsite servers as you like. Offsite server configuration examples include:

One global offsite server - A local server at each managed LAN pushes data to the global offsite server.
Multiple offsite servers - Several local servers are assigned to each offsite server. Multiple offsite servers are used to balance the load.
Cross offsite servers - Supports offsite replication for companies with multiple locations. For example, two company sites each act as the offsite server location for the other company site.

Offsite Folder Structure

The offsite server stores data received from local servers in the directory specified. The top level GUID folder is the GUID of the local server the data is coming from. Second level GUID folders are the GUIDs of the machine IDs being backed up. The following diagram illustrates a typical offsite server directory structure.

File Transfers

Only file changes are pushed to the offsite server. Broken file transfers are automatically restarted at the point left off. Restarting the file transfer from the beginning is not required. Offsite replication uses the same communications technology used in agent/server communications. All traffic is 256-bit encrypted.

Using the Same Machine for the Local Server and Offsite Server

You may assign the offsite server to be the same machine as the local server, but note the following:

You'll need to open a port just to replicate across drives, whereas other replication tools can do so locally.
The files aren't copied offsite. You'll lose the disaster recovery benefit of an offsite backup.

Setting the Name/IP Address and Port

Select a target machine with an agent that will act as the offsite server. The offsite server is always running and listens for connections from local servers using any TCP port you specify. The port cannot be used by any other application. Try using 9721 as it is similar to the agent check-in port. Offsite server ports are restricted to between 1024 and 49151.

Note: Avoid ports 9876 or 9877 if using Backup client v10.x or higher. These ports are used by Acronis Backup & Recovery components and will conflict with Offsite Replication services.

You must specify a DNS name or IP address that can be resolved from the local server. Typically, this is the external name/IP address of the gateway/firewall/router used by the target machine. Configure port range forwarding on your gateway/firewall/router to direct requests for port 9721—or whatever port number you've chosen—to the internal IP address of the machine ID acting as the offsite server.

Note: The offsite server must have a credential set to access the network directory receiving data transfers.

Testing the Offsite Configuration

Once you have configured the offsite server, check pending procedures on the offsite server machine:

Click the or or icon.
Click the Live Connect > Agent Data > Pending Procedures tab.
Ensure the Start Offsite Server procedure ran successfully.

Try to connect to the offsite server component using Telnet. In the command below replace the string your.offsiteServer.com with your Name/IP address. Replace 9721 with the port number you are using.

telnet your.offsiteServer.com 9721

If the connection is successful you should only see a blinking cursor. Once you can verify the offsite server is ready, You can configure the Local Servers.

Create

Click Create to create an offsite server using the options previously selected.

Select the machine ID you want to act as the offsite server.

Name/IP

Enter the IP DNS name or IP address of the offsite server.

Port

Enter an unused port number.

Full path to directory (UNC or local) which receives all data transfers

Enter the full path to the directory, either UNC or local, which receives all data transfers. Do not specify an offsite server directory using a mapped drive. When specifying a UNC path to a share accessed by an agent machine—for example \\machinename\share—ensure the share's permissions allow read/write access using the credential specified for that agent machine in Agent > Set Credential.

Keep only one backup set per agent

If checked, only one backup set is stored on the offsite server per backup agent, regardless of how many sets are saved by the client. If unchecked, all sets specified using the Save last <N> backup sets option on the Schedule Volumes or Schedule Folders pages are stored on the offsite server.

Check-in status

These icons indicate the agent check-in status of each managed machine. Hovering the cursor over a check-in icon displays the agent quick view window.

Online but waiting for first audit to complete

Agent online

Agent online and user currently logged on.

Agent online and user currently logged on, but user not active for 10 minutes

Agent is currently offline

Agent has never checked in

Agent is online but remote control has been disabled

The agent has been suspended

Note: Different icon images display when this add-on module is installed in a 5.x VSA. The Remote Control > Control Machine page displays a legend of the specific icons your VSA system is using.

Delete Icon

Click the delete icon to delete an offsite server record.

Edit Icon

Click a row's edit icon to populate header parameters with values from that row. You can edit these values in the header and re-apply them.

Restart Icon

Click the restart icon to restart a service on a local server or offsite server. You can determine whether this is necessary by displaying the Remote Control > Task Manager process list for a local server or offsite server. You should see KORepCln.exe running on the local server and KORepSrv.exe running on an offsite server. If not, click the restart icon for the respective local server or offsite server. Other symptoms include:

One local server is inactive and the others are fine: restart local server.
All local servers are inactive: restart offsite server.

Machine.Group ID

The list of Machine.Group IDs displayed is based on the Machine ID / Group ID filter and the machine groups the user is authorized to see using System > User Security > Scopes.

Name/IP

The DNS name or IP address used by the offsite server.

Port

The port used by the offsite server.

Directory Path

The directory path used by the offsite server.

Note: Do not specify an offsite server directory using a mapped drive.

Synthetic Full Support

If checked, synthetic full backup components are installed on this machine.