Edit Moniter Networks

Network Discovery > Devices > Device Inspector Panel > Collector tab > pencil icon

Clicking the pencil icon on the Collector tab of the Device Inspector Panel displays the Edit Monitored Network dialog. This dialog allows you edit the range of IP addresses being scanned.

Note: Changing the IP range of addresses in this dialog does not enable network access to those IP addresses by the collector. The collector's location on the network must support the target range of IP addresses specified for device discovery.

• IP Range - Change the range of IP addresses specified for network discovery of devices. Ranges of IP address can be specified as follows.
  • 10.10.10.1-254 - All IP addresses between 10.10.10.1 and 10.10.10.254.
  • 10.10.10-12.1-254 - All IP addresses between 10.10.10.1 and 10.10.12.254.
  • 192.168.0.1/24 - All IP addresses between 192.168.0.1 and 192.168.0.254
• Exclusion - Exclude IP addresses from being included in network discovery.
  • 10.10.10.5, 10.10.10.16 - Excludes both of these IP addresses.
  • 10.10.10.60-69 - Excludes this range of IP addresses.
• Location - Enter a description of the range of IP addresses specified.