If you have an SMS device connected to a COM port on the Network Monitor host you can configure Network Monitor to send SMS notifications.
Configure SMS - Select this box if you have an SMS device connected to the Network Monitor host.
Com port - Select the serial port the SMS device is connected to.
Baud rate - Select the baud rate. This is the speed the SMS device is capable of sending and receiving over the COM port. A setting of 2400 is recommended, if you're not sure what to select.
PIN code - If your SMS device is a GSM phone or modem, you might need to unlock the SIM card with a PIN code. Enter that PIN code in the PIN code field.
Test settings - Click the button to test the configuration, if the test fails make necessary changes or uncheck the Configure SMS check box to skip this part of the wizard.
User phone number
If you did not enter a phone number on the Administrator Settings step of the KNM Startup Guide you can enter it using the menu > My settings page after you logon. Without the phone number in a user record Network Monitor is unable to send an SMS notification to that user.
menu > My settings page after you logon. Without the phone number in a user record Network Monitor is unable to send an SMS notification to that user.