Next Topic

Previous Topic

Book Contents

FTP

Remote Cntl - FTP

The FTP page establishes a FTP session between the administrator's local machine and a selected machine ID. The VSA uses the FTP client built into Internet Explorer so you can operate with the same Windows look and feel. Once the FTP session is initiated, a new browser window pops up displaying the contents of a fixed disk on the managed machine. Just drag and drop files as you normally would.

File Transfer Protocol (FTP

File Transfer Protocol (FTP) is a commonly used protocol for exchanging files over any network that supports the TCP/IP protocol. The FTP server is the program on the target machine that listens on the network for connection requests from other computers. The FTP client is the program on the administrator's machine that initiates a connection to the server. The FTP client machine requires user access rights to the FTP server machine. It is included with the KServer primarily to provide immediate technical support. Once connected, the client can upload files to the server, download files from the server, rename or delete files on the server and so on. Any software company or individual programmer is able to create FTP server or client software because the protocol is an open standard. Virtually every computer platform supports the FTP protocol. Since Kaseya FTP sessions are relayed through the KServer, all FTP sessions are protected by the Kaseya 256 bit rolling encryption protocol.

Initiating FTP

Initiate a FTP session by clicking the name of the target machine. Icons next to the managed machine ID indicate the current connection status for that machine. Only machine IDs with an or icon can be connected to target machines and have live links; all others will be inactive.

Agent has checked in

Agent has checked in and user is logged on. Tool tip lists the logon name.

Agent has not recently checked in

Agent has never checked in

Online but waiting for first audit to complete

The agent is online but remote control is disabled

The agent has been suspended

Note: Users can disable remote control and FTP sessions by right-clicking the icon on their managed machine and selecting Disable Remote Control. You can deny users this ability by removing Disable Remote Control using Agent > Agent Menu.

ActiveX Control

An ActiveX control automatically configures and runs the remote control or FTP package for you. The first time you use any remote control or FTP package on a new machine, your browser may ask if it is OK to download and install this ActiveX control. Click yes when asked. If the ActiveX control is blocked by the browser from running, the administrator or user is presented with a link to manually download and run the remote control package manually.

Helper Applications

In setting up a remote control or FTP session, gateway and port blocking problems are eliminated by always initiating outbound connections from both the target machine and the administrator machine. Helper applications, unique to each supported remote control or FTP package, automatically determine the optimal routing path between the administrator machine and the target machine. If a direct connection is not possible then the helper applications route the remote control traffic through the KServer on the same port used by agents to check-in (default 5721).

Enable verbose relay

Remote control or FTP of machines behind firewalls and NAT gateways may be relayed through the VSA server using a helper application. Checking this box displays a popup window with status information about the normally hidden helper application.

FTP the KServer

Clicking the FTP the KServer link starts an FTP session with the KServer itself. Only master administrators can FTP the KServer.

Remote Control and FTP for Users

Administrators can provide users with the same remote control and FTP access that administrators have using Agent > User Access.

FTP Malfunctions

Some reasons for FTP failure with managed machines are:

  • The administrator machine is blocking outbound traffic on the agent check-in port (default 5721). The firewall may need to be reconfigured.
  • The target machine is on a slow connection. Let the applications run longer than the timeout period and see if that works.
  • Anti-virus software on the target machine may block the connection. This problem is eliminated if KES Security protection is installed on the target machine.
  • Wrong primary KServer address - Remote control can only connect through the primary KServer address. Machines with an agent can connect through either the primary or secondary address. Verify the remote machine can see the primary KServer address using Agent > Check-in Control.
  • You accessed the KServer from a different address. The helper application gets connection information from a cookie on the local machine. To access this information, the helper passes the URL of the KServer to Windows. Say you downloaded the helper application from www.yourKServer.net. Then you open a new browser and access the KServer by typing in its IP address 192.168.1.34. The KServer drops a cookie for 192.168.13.34 while the helper tries to get a cookie corresponding to www.youKServer.net. The helper won't find the cookie. If this happens to you, just download a new helper application and try again.
  • FTP requires Passive FTP be turned off. If you get the following error after attempting an FTP session:

    Word 80% / HTML 100%

    Then disable Passive FTP on your browser as follows:

  1. Open Internet Options... from IE's Tools menu.
  2. Click on the Advanced tab.
  3. In the Browsing section, look for Use Passive FTP and uncheck this setting.
  4. Click OK and try FTP again.

Check-in status

These icons indicate the agent check-in status of each managed machine:

Agent has checked in

Agent has checked in and user is logged on. Tool tip lists the logon name.

Agent has not recently checked in

Agent has never checked in

Online but waiting for first audit to complete

The agent is online but remote control is disabled

The agent has been suspended

Machine.Group ID

The list of Machine ID.Group IDs displayed is based on the Machine ID / Group ID filter and the machine groups the administrator is authorized to see using System > Group Access.

Enter a drive letter to FTP to

Enter the drive letter to FTP to instead of selecting a remote fixed drive option.

Note: The KServer determines how many fixed disks a managed machine has via its Latest Audit.