Next Topic

Previous Topic

Book Contents

Alerts - Backup Alert

Backup > Backup Alert

Monitor > Alerts

  • Select Backup Alert from the Select Alert Function drop-down list

The Alerts - Backup Alert page triggers an alert for backup events on managed machines.

The list of machine IDs you can select depends on the machine ID / group ID filter. To display on this page, machine IDs must have backup software installed on the managed machine using the Backup > Install/Remove page.

To Create a Backup Alert

  1. Check any of these checkboxes to perform their corresponding actions when an alarm condition is encountered:
    • Create Alarm
    • Create Ticket
    • Run Script
    • Email Recipients
  2. Set additional email parameters.
  3. Set additional backup alert specific parameters.
  4. Check the machine IDs to apply the alert to.
  5. Click the Apply button.

To Cancel a Patch Alert

  1. Select the machine ID checkbox.
  2. Click the Clear button.

    The alert information listed next to the machine ID is removed.

Passing Alert Information to Emails and Procedures

The following types of backup alert emails can be sent and formatted:

  • Backup failed
  • Verify backup failed
  • Recurring backup skipped if machine offline
  • Backup Completed Successfully
  • Full Backup Completed Successfully
  • Image Location free space below

Note: Changing the email alarm format changes the format for all Backup Alert emails.

The following variables can be included in your formatted email alerts and in procedures.

Within an Email

Within a Procedure

Description

<at>

#at#

alert time

<be>

#be#

backup failed error message

<bt>

#bt#

backup type

<db-view.column>

not available

Include a view.column from the database. For example, to include the computer name of the machine generating the alert in an email, use <db-vMachine.ComputerName>

<gr>

#gr#

group ID

<id>

#id#

machine ID

<im>

#im#

backup image location

<mf>

#mf#

megabytes free space remaining

<sk>

#sk#

backup skip count

Create Alarm

If checked and an alarm condition is encountered, an alarm is created. Alarms are displayed in Monitor > Dashboard List, Monitor > Alarm Summary and Info Center > Reports > Logs > Alarm Log.

Create Ticket

If checked and an alarm condition is encountered, a ticket is created.

Run Script

If checked and an alarm condition is encountered, an agent procedure is run. You must click the select agent procedure link to choose an agent procedure to run. You can optionally direct the agent procedure to run on a specified range of machine IDs by clicking this machine ID link. These specified machine IDs do not have to match the machine ID that encountered the alarm condition.

Email Recipients

If checked and an alarm condition is encountered, an email is sent to the specified email addresses.

  • The email address of the currently logged on user displays in the Email Recipients field. It defaults from System > Preferences.
  • Click Format Email to display the Format Alert Email popup window. This window enables you to format the display of emails generated by the system when an alarm condition is encountered. This option only displays for master role users.
  • If the Add to current list radio option is selected, when Apply is clicked alert settings are applied and the specified email addresses are added without removing previously assigned email addresses.
  • If the Replace list radio option is selected, when Apply is clicked alert settings are applied and the specified email addresses replace the existing email addresses assigned.
  • If Remove is clicked, all email addresses are removed without modifying any alert parameters.
  • Email is sent directly from the KServer to the email address specified in the alert. Set the From Address using System > Outbound Email.

Apply

Click Apply to apply parameters to selected machine IDs. Confirm the information has been applied correctly in the machine ID list.

Clear

Click Clear to remove all parameter settings from selected machine IDs.

Backup Alert Parameters

The system triggers an alarm whenever the system discovers one of four different backup alert conditions for a selected machine ID:

  • Any Backup Completed - Alerts when any volume or folder backup completes successfully.
  • Full Backup Completed - Alerts when a full volume or folder backup completes successfully.
  • Backup Fails - Alerts when a volume or folder backup stops prior to completion for any reason. Typically, backup fails because the machine is turned off mid-backup or because the network connection to the file server referenced by Image Location is lost.
  • Recurring backup skipped if machine offline <N> times - Alerts when Skip if machine offline is set in Schedule Volumes and the backup is rescheduled the specified number of times because the machine is offline. Use this alert to notify you that backups are not even starting because the machine is turned off at the scheduled volume backup time.
  • Image location free space below <N> MB - Alerts when the hard disk being used to store the backups is less than a specified number of megabytes.

Three additional parameters can be set:

  • Add - Adds alert parameters to selected machine IDs when Apply is selected without clearing existing parameters.
  • Replace - Replaces alert parameters on selected machine IDs when Apply is selected.
  • Remove - Clear alert parameters from selected machine IDs. Click the edit icon next to a machine ID group first to select the alert parameters you want to clear.

    Note: You may specify different alert email addresses for each backup alert type. This lets you send backup complete alerts to the user and only send failures to the user.

Select All/Unselect All

Click the Select All link to check all rows on the page. Click the Unselect All link to uncheck all rows on the page.

Check-in status

These icons indicate the agent check-in status of each managed machine. Hovering the cursor over a check-in icon displays the agent quick view window.

Online but waiting for first audit to complete

Agent online

Agent online and user currently logged on.

Agent online and user currently logged on, but user not active for 10 minutes

Agent is currently offline

Agent has never checked in

Agent is online but remote control has been disabled

The agent has been suspended

Note: Different icon images display when this add-on module is installed in a 5.x VSA. The Remote Control > Control Machine page displays a legend of the specific icons your VSA system is using.

Machine.Group ID

The list of Machine.Group IDs displayed is based on the Machine ID / Group ID filter and the machine groups the user is authorized to see using System > User Security > Scopes.

ATSE

The ATSE response code assigned to machine IDs or SNMP devices:

  • A = Create Alarm
  • T = Create Ticket
  • S = Run Agent Procedure
  • E = Email Recipients

Email Address

A comma separated list of email addresses where notifications are sent.

Any Complete

If checked, an alarm is triggered when any backup is completed for this machine ID.

Full Complete

If checked, an alarm is triggered when a full backup is is completed for this machine ID.

Backup Fails

If checked, an alarm is triggered when any backup fails for this machine ID.

Backup Skipped

If checked, an alarm is triggered when any backup is skipped for this machine ID.